Industrial flooring has to be tough enough to cope with everything it faces during its lifetime. That's why most factory or warehouse floors in Witham have been made of concrete for many decades.
Even so, concrete has its limits and will eventually flake, chip and crack, resulting in expensive repairs and maintenance.
However, there's a newer option that's earned a reputation for being tougher and more versatile than concrete: the resin floor.
Are you a decision-maker or in a position of influence with regard to the type of flooring your company chooses? If so, industrial resin flooring would be a sensible option!
At Epoxy Gang, we provide industrial resin flooring solutions for businesses in Witham of all sizes, and our technicians have a broad knowledge and a wealth of experience to offer.
And after reading what we have to say about the matter, we are certain that you'll agree that this is the perfect choice for your industrial floor.
At Epoxy Gang, we stand by our conviction that resin floors are the best choice for industrial environments in most cases.
Here are a few reasons behind our glowing endorsement:
With credentials like this, it's clear that industrial resin flooring has a bright future ahead, and it would seem like an easy choice to make.
However, in the interests of fairness and to give you the full picture, we should examine any negative points.
Under certain circumstances, a resin floor can become slippery. While epoxy resin itself isn't slippery, and in fact, can become less so when wet, some substances can present a slip hazard when spilt.
However, this problem can be overcome by applying a coating to increase slip resistance. This could be in the form of paint or fine powder - your Epoxy Gang technician will advise you on this, or you can ask about these coatings when you speak to our friendly team when you book your resin floor installation.
Learn more: Is epoxy resin flooring slippery?
The only other problem with resin floors is that they can fail.
This admission might come as a surprise, but it's true - polyurethane and epoxy flooring can let you down.
We feel it's important to make this point because the reason behind 99% of these failures is incorrect installation methods. Incompetent, unskilled or disreputable resin floor companies will use the wrong methods and mixes, leading to contamination of the resin.
If the substrate isn't prepared, levelled, repaired and cleaned thoroughly, then the flooring will soon show signs of this. It may crack, flake or blister. The surface may become clouded and spoiled. And your investment will be lost - unless you can recover the funds, which often proves difficult.
There are two lessons here:
This system is versatile enough to be useful in almost all industrial spaces!
Want to see a few examples of where polyurethane resin flooring and epoxy flooring systems have been used successfully in the industrial sector in Witham? Then here goes:
In fact, it's suitable for almost all industrial and commercial environments! If you can't see your industry represented here and you're not sure whether resin flooring is suitable, get in touch, and we'll be happy to advise you.
We usually recommend allowing around five days for completion, but the size of the area needs to be taken into account. A small industrial unit would only take a couple of days, whereas a much larger space could extend the time by three or four days.
Epoxy floors typically take about a week to cure fully but are usually dry enough to walk on after around 12 hours. You'll need to wait for at least 36 and possibly up to 72 hours after installation to expose the floor to heavy use.
The Epoxy Gang team will provide relevant advice when the installation is completed.
We always strive to keep disruption to a minimum, but this isn't a job that can be rushed, and the resin must be allowed time to set hard and kept free from contamination by dust, dirt or liquids or the finish will be compromised.
Epoxy Gang provides professional industrial flooring options in collaboration with the leading material manufacturers, so you can be assured of the highest standards at all times.
Looking at the facts above, it's easy to see that resin is the ideal solution for commercial and industrial environments. The huge variety of colours and textures allows you to create a personalised design to suit your company brand or specifications. The hard-wearing surface will continue to perform well for at least a decade and probably twice this length of time.
As a decision-maker for your company in relation to industrial flooring resin flooring in Witham, resin is clearly a common-sense choice, so call Epoxy Gang today to discuss your flooring requirements and get a free quote!
In an industrial setting, resin flooring typically lasts between 10 to 20 years, depending on the type of resin used and the wear and tear it undergoes. Its longevity can be maximised with proper maintenance and choosing the right resin for the specific environment.
Resin flooring offers exceptional durability, chemical resistance, and a seamless finish, making it ideal for demanding industrial environments. Moreover, it's easily customisable in terms of colour and finish, enhancing aesthetics whilst ensuring a safe, slip-resistant surface.
Industrial resin flooring is specifically designed to be highly resistant to a variety of chemicals, solvents, and abrasions from heavy machinery. Its non-porous nature ensures it remains unaffected by most industrial spills, making it a favoured choice for industries that handle corrosive or reactive substances.
Yes, certain types of resin flooring, especially polyurethane-based systems, are capable of withstanding extreme temperatures, both hot and cold. This makes them ideal for environments such as cold storage areas or manufacturing plants with high-temperature processes.
